When your Jeep Becomes Too Hot to Handle
You were driving your burlington Mitsubishi going to the office when the temperature gauge suddenly points to “H”. You tried to pull over to the side of the road, popped the hood, then steam from the engine was all over your face. What just happened?Your car just suffered from overheating. There are several reasons why a car overheats. And before your temper gets overheated, too, you may want to know about the causes of car overheating, so you could avoid such a hassle on the road.
The first reason could be a bad thermostat. The engine thermostat is responsible for controlling the radiator fluid flow into the car’s engine. A thermostat gone bad is the one that fails to open, preventing the radiator fluid from entering and cooling the running engine, which eventually causes overheating of the engine.
If the thermostat seems to be working fine, then it may be the radiator that is faulty. Car radiators cool circulating engine coolant to maintain a normal engine temperature. Once the car overheats, the engine must be cooled down naturally before the car can be driven to a mechanic.
Overheating can also be caused by your faulty water pump. A car water pump pressurizes and propels engine coolant within the engine and cooling system. Once the water pump of your burlington Mitsubishi fails, it can prevent sufficient coolant flow and pressurization, which can cause overheating. Take note that a low coolant level may also be responsible for building up of engine heat.
The radiator fan of your burlington Mitsubishi may also fail to cool the engine coolant while the engine is travelling at low speeds. Even if you are not driving your car, your car may still overheat. This happens when the fan clutch (for cars with mechanically driven fan) is worn or when the temperature sensor (for cars with electronically driven fan) is faulty.
Overheating is a car issue that cannot be ignored. This is an issue which causes delays to millions of drivers on a daily basis. You can prevent your car from overheating by checking your antifreeze level regularly, and keeping a flashlight, supply of water, antifreeze, and brake fluid in your car. You can contact your burlington ontario car dealers for more information on your car.
How to Make Ceramic Mugs : How to Pull a Handle on a Clay Mug
|
|
New Flower Cabinet Cupboard Drawer Door Pull Handles Knob Hardware $0.99 |
|
|
New Satin Nickel Fork Knife Spoon Cabinet Door Drawer DIY Pull Handles Knobs $6.69 |
|
|
5.7″ Stainless Steel Cabinet Cupboard Door Drawer DIY Hardware Pull Handle Knobs $0.99 |
|
|
New 6.3″ Furniture Cabinet Cupboard Door DIY Pull Knobs Handles Knob $0.99 |
|
|
New Oval Oil Rubbed Bronze Cabinet Cupboard Drawer DIY Knob Handle Pull Hardware $0.99 |
|
|
Delta 9192T-SSSD-DST Addison Single Handle Pull-Down Kitchen Faucet w/ Touch2O!! $285.00 |
|
|
Satin Nickel Fork Furniture Cabinet Drawer Door DIY Pull handles Hardware Knobs $0.99 |
|
|
Bronze Tone Floral Pull Knob Handle for Drawer Cupboard $4.02 |
|
|
NIB Delta Berkley 19981-SSSD-DST Stainless One Handle Pull-Down Kitchen Faucet!! $200.00 |
|
|
New Cabinet Cupboard Drawer Door DIY Knob Knobs Handles Pull Hardware Kitchen $0.99 |
|
|
7″ Stainless Steel Cabinet Cupboard Door Hardware DIY Knobs Pull Handles $0.99 |
|
|
Satin Nickel Cabinet Door Bin Cup Drawer Pull Hardware Kitchen Handle Knobs $0.99 |
|
|
New Golden Cabinet Cupboard Drawer Door DIY Knobs Handles Pull Hardware Kitchen $0.99 |
|
|
Kitchen Cabinet Hardware Draw pulls handles lot of 24 $22.99 |
|
|
New Oil Rubbed Bronze Round Cabinet Drawer Door DIY Knobs Pull Handles Kitchen $0.99 |
|
|
New Wardrobe Cabinet Door Drawer Bin Cup Pull Handles Hardware Knobs Small $0.99 |
|
|
New Stainless Steel Furniture Cabinet Door Drawer T Bar Pull Handles Knobs $0.99 |
|
|
Lot of Solid Metal(stainless) Kitchen Cabinet Pulls 7 1/2″ Handles $5.00 |
|
|
1-1/4 Birch Wood Drawer Knob / Pull / Handle / – Qty: 25 $7.99 |
|
|
New Satin Nickel Spoon Shaped Cabinet Door Drawer Pull Handles Knobs Hardware $0.99 |
|
|
New 22″ Brushed Nickel Kitchen Faucet Bar Sink Pull Out Single-Handle Dual-Spray $88.99 |
|
|
4 4/5″ Length Copper Tone Pull Handle for Drawer Door $5.24 |
|
|
138 Cabinet Handle Euro Rail Pulls – Brushed Nickel $19.99 |
|
|
5″ Square Bar Pull Stainless Steel Kitchen Cabinet Door Handle 128mm or 5″ $4.99 |
|
|
4 Clock Face Ceramic Knobs Cabinet Drawer Pulls Bathroom Handle #AB $24.95 |
|
|
New Stainless steel Cabinet Door Drawer DIY Pull Hardware Handles Knobs 4.12″ $0.99 |
|
|
7.56″ Cabinet Cupboard Door DIY Pull Knobs Handles Knob 7.56 inch $0.99 |
|
|
10 X Satin Nickel Cabinet Door Drawer Bin Cup Pull Handle Hardware Kitchen Knobs $9.99 |
|
|
New Black Furniture Cabinet Door Drawer Pull Handles Knob 2” $0.99 |
|
|
New Black Cabinet Cupboard Drawer Bin Cup DIY Pull Hardware Kitchen Handle Knobs $0.99 |
|
|
8″ Oil Rubbed Black Cabinet Door Drawer DIY Knobs Pull Hardware Handles Kitchen $0.99 |
|
|
New White Veins Pattern Cabinet Door Drawer Knob Pull Kitchen Handles Black $0.99 |
|
|
9-3/8″ Stainless Steel Cabinet Hardware Pull Handle $3.75 |
|
|
2″ Matte Black Kitchen Cabinet T Bar Pull Handle Knob Hardware 6.95USD Shipping $0.99 |
|
|
NEW Antique Flower Furniture Cabinet Door Drawer DIY Pull hardware Handle Knobs $0.99 |
|
|
New Oval Oil Rubbed Bronze DIY Cabinet Door Drawer Bin Cup Handles Pull Knobs $0.99 |
|
|
New Wardrobe Cabinet Drawer Door Bin Cup DIY Knob Pull Hardware Handles Cyan $0.99 |
|
|
New Satin Nickel Fork Shaped Cabinet Door Drawer Pull Handles Knob $0.99 |
|
|
6-3/4″ Stainless steel Finish Arch Cabinet Pull Handle $3.70 |
|
|
Cabinet Hardware Bronze Tone Flower Pull Handle Knob New $4.08 |
|
|
New Stainless steel Cabinet Door Drawer Bin Cup DIY Hardware Pull Handles Knobs $0.99 |
|
|
New Satin Nickel Furniture Cabinet Door Drawer DIY Pull Hardware Handles Knobs $0.99 |
|
|
12″ Oil Rubbed Black Cabinet Door Drawer DIY Knobs Pull Hardware Handles 12 inch $0.99 |
|
|
GROHE Europlus KITCHEN FAUCET PULL OUT ONE HANDLE SUPER STEEL STAINLESS 32946DC2 $389.99 |
|
|
New Cabinet Cupboard Door Drawer Pull hardware Handles Knob Large $0.99 |
|
|
10″ Oil Rubbed Black Cabinet Door Drawer DIY Knobs Pull Hardware Handles $0.99 |
|
|
6″ Oil Rubbed Black Cabinet Door Drawer DIY Knobs Pull Hardware Handles 6inch $0.99 |
|
|
6″ x 3 3/4″ Solid Bar Pull Kitchen Cabinet and Door Handle Brushed Nickel Finish $1.50 |
|
|
New Stainless steel Furniture Cabinet Cupboard Door Drawer Pull Handles Knobs $0.99 |
|
|
Satin Nickel Spoon Cabinet Drawer Door DIY Pull handles Hardware Kitchen Knobs $0.99 |
|
|
New Bow Oil Rubbed Bronze Cabinet Drawer Door DIY Handles Pull Hardware Knob $0.99 |
|
|
Sonoma Cabinet Hardware Antique Brass Knob Pull $0.99 FREE SHIP TOP KNOBS HANDLE $0.99 |
|
|
New Round Cabinet Door Drawer Bin Cup DIY Handles Pull Knobs Hardware $0.99 |
|
|
New White Ceramic Cabinet Door Drawer Pull Handles Kitchen Bar Knob Black 4.9″ $0.99 |
|
|
Cabinet Clear Plastic Crystal Top Pull Knob Handle New $5.57 |
|
|
20 New Matte Black T Bar Pull Kitchen Cabinet Handle Knob 18″ $10.00 |
|
|
Copper Tone Square Base Threaded Metal Pull Handle Knob $6.16 |
|
|
Delta ADDISON Single Handle Pull-Down Kitchen Faucet w/ Touch2O and Soap Dispnsr $252.00 |
|
|
10 PCS Black Cabinet Cupboard Door Drawer Bin Cup DIY Pull hardware Handle Knobs $9.99 |
|
|
Solid Brass Push and Pull Handle With Plate Lot of 64 GREAT WHOLESALE DEAL! $1,316.00 |
|
|
New Oil Rubbed Bronze Furniture Cabinet Drawer Door Pull Handle Hardware Kitchen $0.99 |
|
|
5-1/2″ Stainless Steel Cabinet Kitchen Pull Handle $2.35 |
|
|
6″ Stainless Steel Kitchen Cabinet Pull Handle Pulls $1.49 |
|
|
2″ Stainless steel Kitchen Cabinet T Pull Handle knob $0.99 |
|
|
New Privacy Satin Nickel Lever Door Pull Handles Knobs Lock Left Hardware $7.99 |
|
|
Heart Style Cabinet Cupboard Door Drawer DIY Pull Hardware Handles Knobs Kitchen $0.99 |
|
|
BLACK Pull Handle BOW 128mm Liberty Hardware Box of 20 $14.99 |
|
|
BLACK Pull Handle BOW 128mm Liberty Hardware Box of 20 $24.99 |
|
|
BLACK Pull Handle BOW 128mm Liberty Hardware $1.25 |
|
|
14″ Chrome Kitchen Faucet Pull Out Single-Handle Dual Spray Sink Modern New $42.95 |
|
|
Satin NICKEL Pull Handle White Ceramic Insert Ball Ends Liberty Box of 20 $19.99 |
|
|
7 in antique brass handles pulls set of 4 $5.99 |
|
|
New White Ceramic & Zinc Cabinet Door Drawer Pull Handles Hardware Kitchen Knobs $0.99 |
|
|
Satin NICKEL Pull Handle White Ceramic Insert Ball Ends Liberty Box of 20 $24.99 |
|
|
4 NEW PORCELAIN HANDLED, BRASS DRAWER PULLS $4.99 |
|
|
New Cabinet Cupboard Door Drawer Kitchen Handles Pull Knob Cyan $3.69 |
|
|
Vintage Brass Cabinet Door Drawer Handles Pulls Knobs lot of 10 $19.00 |
|
|
Crown Handle Brass Drawer Pull – Oil Rubbed Bronze $7.95 |
|
|
20″ Black Square Kitchen Cabinet Pull Handle Hardware $9.45 |
|
|
Satin Nickel 3″ Polished Cabinet Door Drawer DIY Knobs Pull Hardware Handles $0.99 |
|
|
14″ Oil Rubbed Black Furnitur Cabinet Drawer Door DIY Pull Hardware Handle Knobs $0.99 |
|
|
2″ Matte Black Kitchen Cabinet T Bar Pull Handle Knob Hardware 6.95USD Shipping $0.99 |
|
|
PEWTER or NICKEL Cabinet Pull Handle silver gray drawer 5″ NEW screws included $3.98 |
|
|
5.7″ Stainless Steel Furniture Cabinet Door DIY Hardware Pull Handles Knobs $0.99 |
|
|
New Classic 6.3″ Furniture Cabinet Cupboard Door Pull Knobs Handles Knob $0.99 |
|
|
New Privacy Satin Nickel Lever Door Lock DIY Pull handles hardware knobs $8.20 |
|
|
NEW Cabinet Furniture Door Drawer Pull Handles Hardware Knobs Small $0.99 |
|
|
Oil Rubbed Bronze Cabinet Drawer Door Bin Cup DIY Pull Hardware Handles Knobs $0.99 |
|
|
NEW 6.89″ Stainless Steel Cabinet Cupboard Door Hardware Pull Handles $0.99 |
|
|
10 PCS Satin Nickel Cabinet Door Drawer Bin Cup Pull Handles Hardware Knobs $9.99 |
|
|
New 16″ Chrome Kitchen Faucet Bar Sink Pull Down Out Dual-Spray Single-Handle $68.99 |
|
|
New Satin Nickel Knife Shaped Cabinet Door Drawer Pull Handles Knob $0.99 |
|
|
New Oil Rubbed Bronze Cabinet Door Drawer Pull Long Handle Hardware Kitchen Knob $0.99 |
|
|
New Satin Nickel Fork Knife Spoon Cabinet Door Drawer Bin Cup Pull Handles Knobs $6.69 |
|
|
3″ x 4″ Stainless Steel Kitchen Cabinet Bar Pull Handle $1.49 |
|
|
NEW Retro DIY Wardrobe Cabinet Door Drawer Pull Hardware Handles Knobs $0.99 |
|
|
New Ceramic & Zinc Cabinet Cupboard Door Drawer Pull Handles Hardware Knobs $0.99 |
|
|
New Cabinet Cupboard Door Drawer Bin Cup Pull Hardware Handles Knobs $0.99 |
|
|
Fu Printed Bronze Tone Door Cabinet Handle Pull w Screw $9.39 |
|
|
3″ Length Polished Silver Tone Oblate Door Handle Pull $4.60 |
|
|
Bear Paw Meat Handler Forks $9.95 Bear Paws are like an extension of your own hands. Made from hard, durable plastic, they are perfect for lifting hot food items from the pan to the platter. Securely holds food while carving. Perfect as a meat shredding tool…. |
|
|
Black & Decker TRO480BS Toast-R-Oven 4-Slice Toaster Oven $34.88 Perfect as a second oven or as an energy efficient alternative to turning on the full size oven, this countertop appliance offers a large capacity with a curved interior that can fit a 9 inch pizza or toast up to four slices of bread at a time. Use it to toast, bake, broil, and keep foods warm until they”re ready to be served. Its user friendly control panel consists of three knobs.The top knob a… |
|
|
Wusthof 5558-1 Come-Apart Kitchen Shears $14.99 These powerful 8-inch kitchen shears cut food, flowers, paper, cardboard, even carpet. They’re balanced in the hand and work equally well for right-handers and left-handers. Blades formed from high-carbon stainless steel curve inward so they meet in only one place at any given position and cutting action is smooth and exact. One blade’s serrations prevent slippage. A plastic cap on the screw … |
|
|
Belwith Keeler Seshel Collection 1 1/4 Cabinet Knob Antique Brass $4.79 1-1/4″ Diameter Sechel cabinet-and-furniture-knobs – Sherwood Antique Brass… |
|
|
Top Knobs M145 Cabinet Pull $11.52 Tuscany Small D Pull 5 1/16″ (c-c) – German Bronze… |
|
|
Top Knobs M520 Cabinet Pull $8.80 New Haven Pull 5 1/16″ (c-c) – Flat Black… |
|
|
Too Hot To Handle $1.99 … |
|
|
Green Rose Ceramic Cabinet Knobs-6pc Cupboard Drawer Pulls & Handles ~ Lot of 6 ~ K39 Hand-Painted Vintage Ceramic Rose Knobs with Brass Hardware. Ceramic Knobs, Handles & Pulls for Dresser, Drawers, Cabinets & Vanity These vintage ceramic rose knobs or porcelain pulls can be used as cupboard pulls, cabinet knobs, dresser drawer pulls and kitchen handles. The handmade ceramic rose knobs have subtle hand-painted details and vintage rose shape that make these knobs perfect for your shabby or country chic décor. The knobs are hand molded and hand painted so there could be size and color shade variations. Please k… |
|
|
Radio Flyer Pathfinder Wagon Red $74.74 The popular Radio Flyer Pathfinder Wagon combines durability, comfort, and safety in a compact package pleasing to both kids and adults. The well-designed, award winning wagon features cup holders and flip-up seats that support children’s backs. The seats can be put down when hauling stuff around. Parents will appreciate the safety belts, storage compartment, and long handle for easy pulling. Desi… |
|
|
Fisher-Price Brilliant Basics Corn Popper Push Toy $8.88 12 months & up. Popping with colorful balls to entertain and encourage walking, as well as counting and visual tracking. Helps little ones learn numbers and counting skills. Push it along for sounds and lights, as the colorful balls pop inside the plastic dome. Requires 3 AA batteries (not included) for sounds and lights…. |
|
|
#0350 CUB CASE w/FOAM (BLACK) $263.66 Stainless Steel Caster Wheels Included. Built-In/Spring Loaded Pull Handle. Easy Open Double Throw Latches. Open Cell Core With Solid Wall Design – Strong Light Weight. O-Ring Seal And Automatic Pressure Equalization Valve. Stainless Steel Hardware And Padlock Protectors. 3 Level Pick N Pluck With Convoluted Lid Foam. Watertight Crushproof And Dust Proof. Lifetime Guarantee Of Excellence. Interior Dimensions: 20 Inch X 20 Inch X 20 Inch |
|
|
0.3 2.3 Handle Pull in Brushed Nickel $14.16 YQ1401: Features: -Handle pull.-Made in Germany.-Center to center dimension: 0.629”. Construction: -Zinc construction. Color/Finish: -Brushed Nickel finish. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.393” H x 2.362” W x 1.062” D. |
|
|
0.3 x 1.6 Handle Pull – Finish: Black Polished $5.63 Pictured in Chrome Polished – YQ1351: Features: -Handle pull.-Made in Germany.-Center to center dimension: 1.259”. Options: -Available in Polished Chrome, Polished Black or Stainless Steel finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.314” H x 1.574” W x 1.023” D.-1.6” H x 1.2” W x 0.8” D.-3.5” H x 3.9” W x 0.4” D.-1.6” H x 1.2” W x 0.4” D. |
|
|
0.3 x 1.6 Handle Pull – Finish: Polished Chrome $12.3 Pictured in Chrome Polished – YQ1351: Features: -Handle pull.-Made in Germany.-Center to center dimension: 1.259”. Options: -Available in Polished Chrome, Polished Black or Stainless Steel finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.314” H x 1.574” W x 1.023” D.-1.6” H x 1.2” W x 0.8” D.-3.5” H x 3.9” W x 0.4” D.-1.6” H x 1.2” W x 0.4” D. |
|
|
0.3 x 1.6 Handle Pull – Finish: Stainless Steel $12.68 Pictured in Chrome Polished – YQ1351: Features: -Handle pull.-Made in Germany.-Center to center dimension: 1.259”. Options: -Available in Polished Chrome, Polished Black or Stainless Steel finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.314” H x 1.574” W x 1.023” D.-1.6” H x 1.2” W x 0.8” D.-3.5” H x 3.9” W x 0.4” D.-1.6” H x 1.2” W x 0.4” D. |
|
|
0.3 x 14.4 Handle Pull in Stainless Steel $29.93 YQ1424: Features: -Handle pull.-Center to center dimension: 11.338” and 12.598”. Construction: -Zinc construction. Color/Finish: -Stainless Steel finish. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.393” H x 14.488” W x 1.181” D. |
|
|
0.3 x 2.9 Handle Pull in Brushed Nickel $11.9 YQ1315: Features: -Handle pull.-Made in Germany.-Center to center dimension: 2.519”. Construction: -Zinc construction. Color/Finish: -Brushed Nickel finish. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.354” H x 2.992” W x 0.984” D. |
|
|
0.3 x 3 Handle Pull – Finish: Chrome Matte $10.68 Pictured in Stainless Steel – YQ1416: Features: -Handle pull.-Made in Germany.-Center to center dimension: 2.519”. Options: -Available in Stainless Steel, Chrome Matte or Nickel Matte finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.314” H x 3.07” W x 0.984” D. |
|
|
0.3 x 3 Handle Pull – Finish: Nickel Matte $10.68 Pictured in Stainless Steel – YQ1416: Features: -Handle pull.-Made in Germany.-Center to center dimension: 2.519”. Options: -Available in Stainless Steel, Chrome Matte or Nickel Matte finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.314” H x 3.07” W x 0.984” D. |
|
|
0.3 x 3 Handle Pull – Finish: Stainless Steel $13.92 Pictured in Stainless Steel – YQ1416: Features: -Handle pull.-Made in Germany.-Center to center dimension: 2.519”. Options: -Available in Stainless Steel, Chrome Matte or Nickel Matte finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.314” H x 3.07” W x 0.984” D. |
|
|
0.3 x 3.9 Zinc Handle Pull with M4 Screws – Finish: Polished Chrome $8.64 Pictured in Chrome Polished – YQ1347: Features: -Handle pull.-Made in Germany.-Center to center dimension: 2.519”. Options: -Available in Polished Chrome or Brass Plated Polished finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.275” H x 3.858” W x 0.708” D. |
|
|
0.3 x 4 Handle Pull in Nickel Matte $6.91 YQ1281: Features: -Handle pull.-Made in Germany.-Center to center dimension: 3.779”. Construction: -Zinc construction. Color/Finish: -Nickel Matte finish. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.354” H x 3.779” W x 0.4” D. |
|
|
0.3 x 5 Handle Pull – Finish: Black Matte $2.37 Pictured in Black Matt – YQ1383: Features: -Handle pull. -Available in Black Matte or Chrome Matte finish. -Zinc construction. -Compatible with M4 screws. -Made in Germany. Specifications: -Center to center dimension: 3.779 . -Overall dimensions: 0.35 H x 4.91 W x 0.9 D. For more information on this product please view the Sheet(s) below: Handle Pull in Black Matte Specification sheet Handle Pull in Chrome Matte Specification sheet |
|
|
0.3 x 5 Handle Pull – Finish: Chrome Matte $2.93 Pictured in Black Matt – YQ1383: Features: -Handle pull. -Available in Black Matte or Chrome Matte finish. -Zinc construction. -Compatible with M4 screws. -Made in Germany. Specifications: -Center to center dimension: 3.779 . -Overall dimensions: 0.35 H x 4.91 W x 0.9 D. For more information on this product please view the Sheet(s) below: Handle Pull in Black Matte Specification sheet Handle Pull in Chrome Matte Specification sheet |
|
|
0.3 x 5.3 Handle Pull – Finish: Chrome Matte $13.31 Pictured in Chrome Matt – YQ1406: Features: -Handle pull.-Center to center dimension: 5.039”. Options: -Available in Chrome Matte or Nickel Matte finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.314” H x 5.354” W x 0.905” D. |
|
|
0.3 x 5.3 Handle Pull – Finish: Nickel Matte $12.56 Pictured in Chrome Matt – YQ1406: Features: -Handle pull.-Center to center dimension: 5.039”. Options: -Available in Chrome Matte or Nickel Matte finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.314” H x 5.354” W x 0.905” D. |
|
|
0.3 x 5.5 Handle Pull in Nickel Matte $12.96 YQ1415: Features: -Handle pull.-Made in Germany.-Center to center dimension: 5.039”. Construction: -Zinc construction. Color/Finish: -Nickel Matte finish. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.354” H x 5.511” W x 1.259” D. |
|
|
0.3 x 8.5 Handle Pull – Finish: Chrome Matte $17.88 Pictured in Stainless Steel – YQ1422: Features: -Handle pull.-Center to center dimension: 5.039” and 6.299”. Options: -Available in Stainless Steel, Chrome Matte or Nickel Matte finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.393” H x 8.503” W x 1.181” D. |
|
|
0.3 x 8.5 Handle Pull – Finish: Nickel Matte $17.88 Pictured in Stainless Steel – YQ1422: Features: -Handle pull.-Center to center dimension: 5.039” and 6.299”. Options: -Available in Stainless Steel, Chrome Matte or Nickel Matte finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.393” H x 8.503” W x 1.181” D. |
|
|
0.3 x 8.5 Handle Pull – Finish: Stainless Steel $20.35 Pictured in Stainless Steel – YQ1422: Features: -Handle pull.-Center to center dimension: 5.039” and 6.299”. Options: -Available in Stainless Steel, Chrome Matte or Nickel Matte finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.393” H x 8.503” W x 1.181” D. |
|
|
0.4 x 1 Handle Pull – Finish: Nickel Matte/ Leather $13.1 Pictured in Nickel Matt and Leather – YQ1331: Features: -Handle pull.-Made in Germany. Options: -Available in combination of Nickel Matte and Leather or combination of Nickel Matte and Wire finishes. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.394” H x 0.827” W x 1.377” D. |
|
|
0.4 x 1 Handle Pull – Finish: Nickel Matte/Wire $14.27 Pictured in Nickel Matt and Leather – YQ1331: Features: -Handle pull.-Made in Germany. Options: -Available in combination of Nickel Matte and Leather or combination of Nickel Matte and Wire finishes. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.394” H x 0.827” W x 1.377” D. |
|
|
0.4 x 4.5 Handle Pull – Finish: Black Matte $5.37 Pictured in Chrome Polished – YQ1280: Features: -Handle pull.-Made in Germany.-Center to center dimension: 3.779”. Options: -Available in Polished Chrome, Black Matte, Nickel Matte or Polished Brass and Lacquer finish.-Available in 0.4”, 0.8” or 1.0” depth sizes. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -0.4” Handle pull dimensions: 0.393” H x 4.527” W x 0.4” D.-0.8” Handle pull dimensions: 0.393” H x 4.527” W x 0.8” D.-1.0” Handle pull dimensions: 0.393” H x 4.527” W x 1” D. |
|
|
0.4 x 4.5 Handle Pull – Finish: Nickel Matte $9.63 Pictured in Chrome Polished – YQ1280: Features: -Handle pull.-Made in Germany.-Center to center dimension: 3.779”. Options: -Available in Polished Chrome, Black Matte, Nickel Matte or Polished Brass and Lacquer finish.-Available in 0.4”, 0.8” or 1.0” depth sizes. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -0.4” Handle pull dimensions: 0.393” H x 4.527” W x 0.4” D.-0.8” Handle pull dimensions: 0.393” H x 4.527” W x 0.8” D.-1.0” Handle pull dimensions: 0.393” H x 4.527” W x 1” D. |
|
|
0.4 x 4.5 Handle Pull – Finish: Polished Brass and Lacquer $9.58 Pictured in Chrome Polished – YQ1280: Features: -Handle pull.-Made in Germany.-Center to center dimension: 3.779”. Options: -Available in Polished Chrome, Black Matte, Nickel Matte or Polished Brass and Lacquer finish.-Available in 0.4”, 0.8” or 1.0” depth sizes. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -0.4” Handle pull dimensions: 0.393” H x 4.527” W x 0.4” D.-0.8” Handle pull dimensions: 0.393” H x 4.527” W x 0.8” D.-1.0” Handle pull dimensions: 0.393” H x 4.527” W x 1” D. |
|
|
0.4 x 4.5 Handle Pull – Finish: Polished Chrome $8.67 Pictured in Chrome Polished – YQ1280: Features: -Handle pull.-Made in Germany.-Center to center dimension: 3.779”. Options: -Available in Polished Chrome, Black Matte, Nickel Matte or Polished Brass and Lacquer finish.-Available in 0.4”, 0.8” or 1.0” depth sizes. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -0.4” Handle pull dimensions: 0.393” H x 4.527” W x 0.4” D.-0.8” Handle pull dimensions: 0.393” H x 4.527” W x 0.8” D.-1.0” Handle pull dimensions: 0.393” H x 4.527” W x 1” D. |
|
|
0.4 x 4.7 Handle Pull – Finish: Black Matte $8.49 Pictured in Chrome Polished – YQ1304: Features: -Handle pull.-Made in Germany.-Center to center dimension: 3.779”. Options: -Available in Polished Chrome, Black Matte or Polished Gold finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.354” H x 4.724” W x 0.984” D. |
|
|
0.4 x 4.7 Handle Pull – Finish: Polished Chrome $7.21 Pictured in Chrome Polished – YQ1304: Features: -Handle pull.-Made in Germany.-Center to center dimension: 3.779”. Options: -Available in Polished Chrome, Black Matte or Polished Gold finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.354” H x 4.724” W x 0.984” D. |
|
|
0.4 x 4.7 Handle Pull – Finish: Polished Gold Color $10.73 Pictured in Chrome Polished – YQ1304: Features: -Handle pull.-Made in Germany.-Center to center dimension: 3.779”. Options: -Available in Polished Chrome, Black Matte or Polished Gold finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.354” H x 4.724” W x 0.984” D. |
|
|
0.4 x 5.4 Zinc Handle Pull with M4 Screws – Size / Finish: 0.354 H x 4.094 W x 0.4 D / Matte Nickel $5.04 Pictured in Nickel Matt – YQ1254: Features: -Handle pull.-Made in Germany. Options: -Available in several finishes. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Center to center dimension of 5.345” handle pull: 3.779”.-Center to center dimension of 4.094” handle pull: 5.039”.-0.354” H x 4.133” W x 0.4” D.-0.354” H x 4.094” W x 0.4” D.-0.393” H x 4.094” W x 0.4” D.-0.393” H x 5.354” W x 0.4” D.-0.393” H x 5.354” W x 1.1” D.-0.393” H x 5.354” W x 0.4” D. |
|
|
0.4 x 5.4 Zinc Handle Pull with M4 Screws – Size / Finish: 0.393 H x 4.094 W x 0.4 D / White $5.98 Pictured in Nickel Matt – YQ1254: Features: -Handle pull.-Made in Germany. Options: -Available in several finishes. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Center to center dimension of 5.345” handle pull: 3.779”.-Center to center dimension of 4.094” handle pull: 5.039”.-0.354” H x 4.133” W x 0.4” D.-0.354” H x 4.094” W x 0.4” D.-0.393” H x 4.094” W x 0.4” D.-0.393” H x 5.354” W x 0.4” D.-0.393” H x 5.354” W x 1.1” D.-0.393” H x 5.354” W x 0.4” D. |
|
|
0.4 x 5.4 Zinc Handle Pull with M4 Screws – Size / Finish: 0.393 H x 5.354 W x 0.4 D / Nickel Matte $7.37 Pictured in Nickel Matt – YQ1254: Features: -Handle pull.-Made in Germany. Options: -Available in several finishes. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Center to center dimension of 5.345” handle pull: 3.779”.-Center to center dimension of 4.094” handle pull: 5.039”.-0.354” H x 4.133” W x 0.4” D.-0.354” H x 4.094” W x 0.4” D.-0.393” H x 4.094” W x 0.4” D.-0.393” H x 5.354” W x 0.4” D.-0.393” H x 5.354” W x 1.1” D.-0.393” H x 5.354” W x 0.4” D. |
|
|
0.4 x 5.4 Zinc Handle Pull with M4 Screws – Size / Finish: 0.393 H x 5.354 W x 1.1 D / Black $7.37 Pictured in Nickel Matt – YQ1254: Features: -Handle pull.-Made in Germany. Options: -Available in several finishes. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Center to center dimension of 5.345” handle pull: 3.779”.-Center to center dimension of 4.094” handle pull: 5.039”.-0.354” H x 4.133” W x 0.4” D.-0.354” H x 4.094” W x 0.4” D.-0.393” H x 4.094” W x 0.4” D.-0.393” H x 5.354” W x 0.4” D.-0.393” H x 5.354” W x 1.1” D.-0.393” H x 5.354” W x 0.4” D. |
|
|
0.4 x 5.4 Zinc Handle Pull with M4 Screws – Size / Finish: 0.393 H x 5.354 W x 1.1 D / Polished Chrome $7.15 Pictured in Nickel Matt – YQ1254: Features: -Handle pull.-Made in Germany. Options: -Available in several finishes. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Center to center dimension of 5.345” handle pull: 3.779”.-Center to center dimension of 4.094” handle pull: 5.039”.-0.354” H x 4.133” W x 0.4” D.-0.354” H x 4.094” W x 0.4” D.-0.393” H x 4.094” W x 0.4” D.-0.393” H x 5.354” W x 0.4” D.-0.393” H x 5.354” W x 1.1” D.-0.393” H x 5.354” W x 0.4” D. |
|
|
0.4 x 5.4 Zinc Handle Pull with M4 Screws – Size / Finish: 0.393 H x 5.354 W x 1.1 D / Stainless Steel $8.46 Pictured in Nickel Matt – YQ1254: Features: -Handle pull.-Made in Germany. Options: -Available in several finishes. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Center to center dimension of 5.345” handle pull: 3.779”.-Center to center dimension of 4.094” handle pull: 5.039”.-0.354” H x 4.133” W x 0.4” D.-0.354” H x 4.094” W x 0.4” D.-0.393” H x 4.094” W x 0.4” D.-0.393” H x 5.354” W x 0.4” D.-0.393” H x 5.354” W x 1.1” D.-0.393” H x 5.354” W x 0.4” D. |
|
|
0.4 x 5.4 Zinc Handle Pull with M4 Screws – Size / Finish: 0.393 H x 5.354 W x 1.1 D / White $9.32 Pictured in Nickel Matt – YQ1254: Features: -Handle pull.-Made in Germany. Options: -Available in several finishes. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Center to center dimension of 5.345” handle pull: 3.779”.-Center to center dimension of 4.094” handle pull: 5.039”.-0.354” H x 4.133” W x 0.4” D.-0.354” H x 4.094” W x 0.4” D.-0.393” H x 4.094” W x 0.4” D.-0.393” H x 5.354” W x 0.4” D.-0.393” H x 5.354” W x 1.1” D.-0.393” H x 5.354” W x 0.4” D. |
|
|
0.4 x 6 Handle Pull – Finish: Black Matte $3.68 Pictured in Black Matt – YQ1382: Features: -Handle pull.-Made in Germany.-Center to center dimension: 3.779”. Options: -Available in Black Matte, Chrome Matte or Nickel Plated Matte finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.43” H x 6.1” W x 1.06” D. |
|
|
0.4 x 6 Handle Pull – Finish: Chrome Matte $4.89 Pictured in Black Matt – YQ1382: Features: -Handle pull.-Made in Germany.-Center to center dimension: 3.779”. Options: -Available in Black Matte, Chrome Matte or Nickel Plated Matte finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.43” H x 6.1” W x 1.06” D. |
|
|
0.4 x 6 Handle Pull – Finish: Nickel Plated Matte $3.72 Pictured in Black Matt – YQ1382: Features: -Handle pull.-Made in Germany.-Center to center dimension: 3.779”. Options: -Available in Black Matte, Chrome Matte or Nickel Plated Matte finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.43” H x 6.1” W x 1.06” D. |
|
|
0.4 x 6 Handle Pull in Nickel Matte $6.65 YQ1295: Features: -Handle pull.-Made in Germany.-Center to center dimension: 5.039”. Construction: -Zinc construction. Color/Finish: -Nickel Matte finish. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.433” H x 5.787” W x 0.5” D. |
|
|
0.4 x 6.0 Zinc Handle Pull – Finish: Chrome Matte $5.31 YQ1426: Features: -Handle pull.-Made in Italy.-Center to center dimension: 5.039”. Options: -Available in Chrome Matte or Nickel Matte finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.433” H x 6.062” W x 1.181” D. |
|
|
0.4 x 6.0 Zinc Handle Pull – Finish: Nickel Matte $4.96 YQ1426: Features: -Handle pull.-Made in Italy.-Center to center dimension: 5.039”. Options: -Available in Chrome Matte or Nickel Matte finish. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.433” H x 6.062” W x 1.181” D. |
|
|
0.4 x 6.1 Handle Pull – Size / Finish: 0.4 H x 6.1 W x 1.2 D / Black Matte $9.32 Pictured in Black Matt – YQ1307: Features: -Handle pull.-Made in Germany. Options: -Available in Black Matte or Nickel Matte finish.-Available in 6” or 6.1” width sizes. Specifications: -Compatible with M4 screws. Dimensions: -Center to center dimension of 6” and 6.1” handle pull: 5.039”.-6” Handle pull dimensions: 0.4” H x 6” W x 1.1” D.-6.1” Handle pull dimensions: 0.4” H x 6.1” W x 1.2” D. |
|
|
0.4 x 6.4 Handle Pull in Nickel Matte $14.8 YQ1275: Features: -Handle pull.-Made in Germany.-Center to center dimension: 3.779”. Construction: -Zinc construction. Color/Finish: -Nickel Matte finish. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.433” H x 6.417” W x 0.4” D. |
|
|
0.4 x 9 Handle Pull in Nickel Matte $16.27 YQ1276: Features: -Handle pull.-Made in Germany.-Center to center dimension: 6.299”. Construction: -Zinc construction. Color/Finish: -Nickel Matte finish. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.433” H x 8.74” W x 0.4” D. |
|
|
0.5 x 3.2 Handle Pull in Polished Chrome $10.76 YQ1277: Features: -Handle pull.-Made in Germany.-Center to center dimension: 2.519”. Construction: -Zinc construction. Color/Finish: -Polished Chrome finish. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.59” H x 3.228” W x 1” D. |
|
|
0.5 x 4 Handle Pull – Finish: Black $8.36 Pictured in Chrome Polished – YQ1285: Features: -Handle pull.-Made in Germany.-Center to center dimension: 3.779”. Options: -Available in Polished Chrome, Black, Nickel Matte or Polished Gold finish.-Available in 0.4”, 0.8”,1.0” or 1.2” depth sizes. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -0.4” Handle pull dimensions: 0.511” H x 4.094” W x 0.4” D.-0.8” Handle pull dimensions: 0.511” H x 4.094” W x 0.8” D.-1.0” Handle pull dimensions: 0.511” H x 4.094” W x 1” D.-1.2” Handle pull dimensions: 0.511” H x 4.094” W x 1.2” D. |
|
|
0.5 x 4 Handle Pull – Finish: Nickel Matte $8.36 Pictured in Chrome Polished – YQ1285: Features: -Handle pull.-Made in Germany.-Center to center dimension: 3.779”. Options: -Available in Polished Chrome, Black, Nickel Matte or Polished Gold finish.-Available in 0.4”, 0.8”,1.0” or 1.2” depth sizes. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -0.4” Handle pull dimensions: 0.511” H x 4.094” W x 0.4” D.-0.8” Handle pull dimensions: 0.511” H x 4.094” W x 0.8” D.-1.0” Handle pull dimensions: 0.511” H x 4.094” W x 1” D.-1.2” Handle pull dimensions: 0.511” H x 4.094” W x 1.2” D. |
|
|
0.5 x 4 Handle Pull – Finish: Polished Chrome $8.36 Pictured in Chrome Polished – YQ1285: Features: -Handle pull.-Made in Germany.-Center to center dimension: 3.779”. Options: -Available in Polished Chrome, Black, Nickel Matte or Polished Gold finish.-Available in 0.4”, 0.8”,1.0” or 1.2” depth sizes. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -0.4” Handle pull dimensions: 0.511” H x 4.094” W x 0.4” D.-0.8” Handle pull dimensions: 0.511” H x 4.094” W x 0.8” D.-1.0” Handle pull dimensions: 0.511” H x 4.094” W x 1” D.-1.2” Handle pull dimensions: 0.511” H x 4.094” W x 1.2” D. |
|
|
0.5 x 4 Handle Pull – Finish: Polished Gold Color $10.09 Pictured in Chrome Polished – YQ1285: Features: -Handle pull.-Made in Germany.-Center to center dimension: 3.779”. Options: -Available in Polished Chrome, Black, Nickel Matte or Polished Gold finish.-Available in 0.4”, 0.8”,1.0” or 1.2” depth sizes. Construction: -Zinc construction. Specifications: -Compatible with M4 screws. Dimensions: -0.4” Handle pull dimensions: 0.511” H x 4.094” W x 0.4” D.-0.8” Handle pull dimensions: 0.511” H x 4.094” W x 0.8” D.-1.0” Handle pull dimensions: 0.511” H x 4.094” W x 1” D.-1.2” Handle pull dimensions: 0.511” H x 4.094” W x 1.2” D. |
|
|
0.5 x 4 Zinc Handle Pull $70.17 YQ1455: Features: -Handle pull.-Made in Italy.-Center to center dimension: 1.259”. Construction: -Zinc construction. Color/Finish: -Combination of Polished Chrome and Crystal finishes. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.59” H x 3.897” W x 0.984” D. |
|
|
0.5 x 4.1 Zinc Handle Pull in Polished Chrome $4.27 YQ1073: Features: -Handle pull.-Center to center dimension: 3.779”. Construction: -Zinc construction. Color/Finish: -Polished Chrome finish. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.511” H x 4.133” W x 1.102” D. |
|
|
0.5 x 4.3 Handle Pull in Nickel Matte $13.23 YQ1412: Features: -Handle pull.-Made in Germany.-Center to center dimension: 3.779”. Construction: -Zinc construction. Color/Finish: -Nickel Matte finish. Specifications: -Compatible with M4 screws. Dimensions: -Overall dimensions: 0.59” H x 4.37” W x 1.023” D. |
|
|
0.5 x 5 Zinc Handle Pull – Finish: Antique Bronze $7.02 YQ1435: Features: -Handle pull.-Center to center dimension: 3.779”. Options: -Available in Antique Bronze, Dark Oil Rubbed Bronze, Pewter or Satin Pewter finish. Construction: -Zinc construction. Dimensions: -Overall dimensions: 0.511” H x 5.118” W x 1.102” D. |
|
|
0.5 x 5 Zinc Handle Pull – Finish: Dark Oil Rubbed Bronze $5.1 YQ1435: Features: -Handle pull.-Center to center dimension: 3.779”. Options: -Available in Antique Bronze, Dark Oil Rubbed Bronze, Pewter or Satin Pewter finish. Construction: -Zinc construction. Dimensions: -Overall dimensions: 0.511” H x 5.118” W x 1.102” D. |